Getting started

How to photograph runners so every runner has a photo to buy

Most race photography tips are about one great shot. When you sell, every runner needs a good one. How to photograph runners: the settings that keep face and bib sharp, the stride runners buy, dawn starts and the back of the pack.

PixDeel Team

A white man in his late fifties runs a cold November 10K in Minneapolis, caught mid-stride past the mile 4 sign, his race bib sharp and readable on his chest

To photograph runners so they buy, shoot at 1/1000 s or faster with continuous autofocus, stop down to around f/5.6 so the face and the bib are sharp in the same frame, and fire short bursts timed to the moment both feet leave the ground. That's how to photograph runners when you're shooting to sell: every runner in the field, from the leaders to the last walker, should get at least one frame worth paying for.

Most guides on race photography teach you to make one great photo of a runner. When you sell, you need a few hundred good ones, one per person, and the person decides. One marathon photographer calls it assembly line photography: compose and expose well, keep shooting, and hope each runner likes what they see enough to buy it. This guide is about stacking the odds on that last part. Where to stand is covered in our guide on how to sell race photos; this one starts once you're on your spot with the camera up.

Race settings that keep the face and the bib sharp#

Start with shutter speed. A photographer answering a newcomer about to shoot a local marathon put the floor at 1/1000 s to freeze arms and legs, and said a runner coming straight at you can get away with 1/500 or 1/700. We'd stay at 1/1000 for the whole race. Hands and feet blur first, and a blurry hand on the chest can be the thing covering the bib.

Aperture is where race photos usually go wrong. With a long lens wide open and a runner close in, the depth of field gets thin: if the focus lands on a knee, the face can go soft. In the same assembly line thread, the critique of a posted shot was exactly that: focus on the leg, hands and face already out. For a single runner, f/5.6 keeps the face and the bib on the chest in the same sharp zone. For a pack at the start, close down to f/8 or f/11 so more than one row is sharp.

Let ISO float. Auto ISO with your shutter and aperture locked, and a ceiling you trust on your camera, means you stop thinking about exposure as clouds move or the course goes from sun to shade.

Focus on one runner at a time#

Use continuous autofocus (AI Servo on Canon, AF-C on Nikon and Sony), with face or eye detection on if your camera has it. Detection locks onto the face and tracks it, and the bib sits a short distance below, inside the depth of field you just set.

On an older body without detection, a single point on the runner's chest works better than a wide zone, which tends to grab whoever is closest or brightest. A beginner shooting a 5K and 10K on an entry-level camera got the same advice when focus kept arriving late: continuous focus, a single point kept on the subject, and JPEG instead of RAW so the buffer doesn't stall mid-burst.

Pick one runner, follow them in, shoot, then move to the next. If you try to hold the whole pack in focus at once, the camera usually settles on nobody in particular.

How to photograph runners in the stride they'll buy#

Runners don't buy the frame where their foot hits the road. The impact pulls the face and the legs down, and in the comments on that marathon thread, photographers agreed it's almost always the unflattering one. The frame people pick is the float, when both feet are off the ground and the runner looks light.

So time the burst instead of stretching it. At 10 frames per second, a one-second burst on every runner is about 4,000 frames per spot in a 400-runner race. Two or three frames timed to the float give you the same chance at the good one, about 1,000 frames per spot, and far less to sort through later. Our guide on selling game photos the same day covers that sorting; the fewer near-identical frames you bring home, the faster it goes.

One more thing on expression: runners mid-course often look tense or in pain, as the photographer above pointed out. Shoot a little earlier than you think, while they're still coming toward you, before the effort hits their face.

Shooting a dawn start#

Plenty of races start before sunrise, and that's where most photographers give up. One shooter who covers events that start in the middle of the night said they wait for the sun, because everything comes out blurry. The advice in that thread is the honest one: open the lens all the way, accept a high ISO, find the stretch of course that has light (a street lamp, a lit storefront, the start arch) and let the runners come to you there.

Before sunrise at the start of a half marathon in Houston, a photographer stands at the curb under a street lamp with a long lens up as the first wave of runners leaves the start arch in the blue light

Skip the flash in a runner's face. Someone running in the dark doesn't need to be blinded. If the light is too low for 1/1000, drop to 1/500 for runners coming straight at you, and save the hero frames for when the sun is up.

The back of the pack buys too#

The leaders get photographed by everyone. The runner who finishes in the last third, or walks most of the course, often has no photo of their race at all, and that's a buyer. Shoot them with the same care and the same settings. Walkers move slower, so you can relax the shutter a little, but keep the aperture: their face and bib need to be just as sharp.

Keeping one set of settings from the first runner to the last also pays off at the computer. Frames that match in exposure and color can be corrected as one batch, which is what makes same-day uploads realistic.

Shoot so the search finds them#

When you set up a running race on PixDeel, bib number detection comes on by itself: there's nothing to switch on. Each photo you upload is scanned for the number on the chest, and a runner who types their bib gets back the frames where that number can be read. That's where the f/5.6 and the runner coming toward you pay off: a sharp, readable bib is a photo the search can hand to the right person, and you don't tag anything.

The page of a 10K on PixDeel on a phone, with Search by Bib Number right under Search by Selfie, the way runners land on it after the race

When the bib is covered by an arm or a jacket, the runner can still search with a photo of themselves and find the frames they're in. How the two searches work is in our guide on how to sell race photos.

Quick settings for your next race#

  1. Shutter at 1/1000 s, 1/500 s only for runners coming straight at you in low light.
  2. Aperture f/5.6 for single runners, f/8 to f/11 for the pack at the start.
  3. Auto ISO with a ceiling.
  4. Continuous autofocus with face or eye detection, or a single point on the chest.
  5. Two or three frames per runner, timed to both feet off the ground.
  6. Same settings from the leaders to the last walker.

Every runner you shoot that way is a possible sale, and you keep 90% of each one, with card processing never taken from your share. Free to start, pay only when you sell.

Share this article

Know someone who shoots events? Send it their way.

Your next event is free to list.

Keep 90% of every sale. Nothing before.

Start selling

Free to start. No subscription required. No card required.